Enerdrive B-TEC 125Ah Lithium Battery
SKU: EPL-125BT-12V Learn More»Product Description
Enerdrive B-TEC 125Ah Lithium Battery, 5 Years Warranty. The Enerdrive B-TEC 12V 125Ah G2 Lithium Battery now comes with a Battery Strap. Enerdrive are proud to introduce the new ePOWER B-TEC 125Ah Lithium Battery with Smart Phone Monitoring Technology.
The ePOWER B-TEC is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
Smart Phone Monitoring System
The Enerdrive ePOWER B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
Battery Capacity | Battery Voltage | Battery Current (Amps) |
Battery State of Charge (SOC) | Battery State of Health (SOH) | Battery Status |
Individual Cell Voltage | Battery Temperature | Battery Cycles |
Battery Alarms | Battery Event Information |
Battery Management System
The battery is also equipped with an internal LiFePO4 Battery Management System (BMS) that can monitor and optimize each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
Size & Weight Savings
Lithium v AGM Capacities;
- 125Ah Lithium = 200Ah AGM
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
Please Note: The G2 battery is capable to be paralleled to a second G2 battery. For maximum performance and lifespan of your G2 battery, no more than 4 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.
*Note: As stipulated by the manufacturer Enerdrive, failure to charge the Enerdrive Lithium Battery range with an Enerdrive or Redarc Lithium Profile battery charger will void Enerdrive manufacturer warranty.
Specifications
SKU EPL-125BT-12V
Brand Enerdrive
GTIN 9342616019689
Warranty Period: 5 Years
Product Category Batteries
Battery Voltage 12V
Amp Hours (Ah) 125
Battery Length (mm) 318
Battery Width (mm) 165
Battery Height (mm) 232
Battery Weight (kg) 15.5
Model EPL-125BT-12V G2
Nominal Voltage 12.8V
Nominal Capacity 125Ah
Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles
Battery Charge Temperature 0 ̴ 45°C
Normal Charge Voltage CV/CC* 14.20 ̴ 14.60V
Standby (Float) Voltage 13.50 ̴ 13.80V
Maximum Charge Current 60A @ 25°C for 30mins
Recommended Charge Current for Maximum Life 20~60A
Battery Discharge Temperature -20 ̴ 60°C
Battery Output Voltage Range 11.00 ̴ 14.60V
Maximum Discharge Current 100A @ 25°C ± 5°C for 30mins
Pulse Discharge Current 450A for 1.0s
Discharge Cut-off Voltage ≤11.20V
Over-Charge Protection Per Cell 3.90V ± 0.03V
Over-Charge Release Per Cell 3.60V ± 0.05V
Over-Charge Release Method Discharge below release voltage
Over-discharge Protection Per Cell 2.80V ± 0.05V
Over-discharge Release Per Cell 3.20V ± 0.05V
Over-discharge Release Method Apply Charge/Voltage ≥12.8V
Battery Manual Reset Button Yes
Discharge Over Current 110A for 30s – 450A for 1s
Protection Reset Time Approx 10s Auto Release
Over Current Release Method Disconnect Load
Battery Charge Over Temperature Protection to 55°C ± 5°C, Release at 45°C ± 5°C
Battery Discharge Over Temperature Protection to 65°C ± 5°C, Release at 50°C ± 5°C
Short Circuit Protection Auto release after 5s
Case Construction Hi Impact ABS Plastic
Temperature & Humidity Range ≤ 30 days -20°C ̴ 60°C, 5 ̴ 75% RH, ≥ 90 days -10°C ̴ 45°C, 5 ̴ 75% RH
Videos
Enerdrive B-TEC Lithium Batteries - Part 1 - Application
Enerdrive B-TEC Lithium Batteries - Part 2 - Specifications
Enerdrive B-TEC Lithium Batteries - Part 3 - Installation
Enerdrive B-TEC Lithium Batteries - Part 4 - Settings
Enerdrive B-TEC Lithium Batteries - Part 5 - Operation
Enerdrive B-TEC Lithium Batteries - Part 6 - Fault Finding
The Best Caravan Battery?
What Will My Camping Battery Run?
Expanding Your Enerdrive B-TEC Capacity: Enerdrive Batteries in Parallel
How To: Resetting A Flat Enerdrive BTEC or eLITE Battery
Exploring The Enerdrive BMS Found Internally In Their Lithium Batteries
Lithium Batteries Australia - Are they Safe
Enerdrive 125Ah Lithium Battery Customer Review
Product Q&A
-
I have a Tvan, which requires the battery to be mounted on its side.Will this void the warranty?
Hi Chris,
Thanks for getting in touch.
Enerdrive do not recommend installing their batteries on their side.
We would recommend giving them a call to discuss if installing it this way would cause any issues with warranty. Enerdrive can be reached on 1300 851 535.
-
Warranty . Thanks Rob Beer
Hi Rob,
The manufacturers warranty period for the Enerdrive 125aH lithium batteries is 2 years.
As of 2020, all Enerdrive products now comes with a 5 Year Warranty. Any products purchased since 1st of January 2020, Enerdrive retrospectively applying the new 5 year warranty period.
-
Can I connect the Enerdrive B-tec Lithium Batteries in Parallel or in series?
Hi there,
You cannot connect any of the EnerdriveB-TEC batteries in series. You can however connect up to two only of the same size (ah) B-TEC batteries in Parallel. Enerdrive recommend that you only do this if you don't over load the max current of the internal BMS board from ONE OF THE BATTERIES.
Example. If you connect 2 x 200Ah B-TEC batteries then do not draw more than 200A of DC current from that battery bank, as one (1) single 200Ah B-TEC battery is only capable of handling 200A DC.
The main aim of connecting two (2) of the Enerdrive B-TEC batteries is not to increase your maximum DC current output, but to double your storage capacity.
Double the storage equals double the time you can stay powered up and off the grid.
Be sure to always consult the Enerdrive user manuals for correct cable sizing, fuse sizing and wiring diagrams.
We now sell an Enerdrive battery bundle with a parallel kit - please CLICK HERE to find it.
-
Is it ok to install a enerdrive lithium battery under the bonnet of the a vehicle?If it is installed under the bonnet of a vehicle what damage could be done to the battery?
Hi There,
Enerdrive advise to never install any of their lithium batteries under the bonnet. The amount of heat produced in the engine bay can cause damage to the battery cells and would not be warrantied.
-
Would this battery be suitable for use in the Engel Battery box with the inbuilt DCDC charger?
Hi There,
This battery will fit in the Engel Battery box.
The should not be an issue using them both together due to the battery boxes lithium charging capabilities.
-
Here in Australia the hot sun can raise the temperature inside a parked motor vehicle to above 60 degrees C. Is this of concern if I have a 60 litre Evacool fridge running using a 125 amp/hr Enerdrive Lithium battery?
Hi There
Power usage is dependent on several factors including (but not limited to): ambient temperature, required fridge temperature, temperature of fridge contents, compressor speed (fridge setting) and ventilation.
At 32C, the average power draw would be approx 2 A/Hr. This would increase considerably at 60C.
You would still likely get 24 hours usage off a 125ah battery.
Kind Regards
-
I have a Cub with a Projecta Smart charger. Can I replace my AGM battery with a lithium, and still run the same charger. I also run solar for charging. Will a swap work, or do i need to start again?
Hi There
You can repalce your AGM with a lithium battery and keep the charger only if your charger is capable of charging lithium batteries.
Without a proper charger you will damage your battery.
Customer Reviews
Enerdrive Powers my Slide-on Review by Michael DillonThese batteries are excellent or I wouldn't have purchased my second one 2 years down the track to give me more capacity.(Posted on 30 June 2024)
Great battery Review by TanyaThis is my second battery, which I have set up in parallel with my first. So reliable and charge quickly. Love the blue tooth connection. Now I can power everything in the caravan for days.(Posted on 26 October 2023)
Good product Review by Barry AndersonLike the Bluetooth facility giving me the battery status(Posted on 11 December 2022)
Super quick delivery, friendly and helpful phone s Review by Michael ConnellyI bought the Enerdrive battery and a new charger over the phone. MyGenerator were happy to price match on the charger and arrange for me to pick it up the next day. so I could be ready for the battery. As planned, the battery arrived 2 days later. Perfect.(Posted on 11 June 2022)
Warranty
For details relating to this product's warranty CLICK HERE
Delivery
For details relating to our delivery process CLICK HERE