BMPRO Aspero Power Management System & Information Display

BMPRO BC300 External Shunt and CommLink, 2 Year Warranty. BMPRO BC300 External Shunt and CommLink provides additional battery monitoring for your BatteryPlus35 and J35 systems.

The addition of the BC300 to the BatteryPlus35 and J35 battery management systems allows high current loads and external charge sources to connect direct to battery via the BC300 External Shunt. This enhances system behaviour with temperature monitoring of the battery for greater protection.

BC300 also provides your BatteryPlus35 and J35 with additional information on battery usage so your displays such as the Trek, JControl and JHub are always up-to-date on battery Time Remaining and State of Charge.

Features:

• High current/external charge monitoring
• Wireless Bluetooth communication to Commlink – easy to install / retrofit
• DIY installation and simple pairing procedure
• Compatible with Lead Acid and LiFePO4 deep cycle batteries

BMPRO Dipper Water Tank Level Indicator with 2.5m Cable, 2 Year Warranty. The Dipper is a digital water tank level indicator designed to be used in both plastic and metal water tanks. It gives an accurate reading of the water levels in fresh and grey water tanks on recreational vehicles, camper trailers and boats.

This water tank sensor is easy to install into the side of your water tanks. Retrofitting is a DIY job thanks to the 5 pin connector located close to the ring terminal.

Features:

• Easy Installation – no need to rewire if retrofitting
• Fits existing water tanks
• Compatible with BMPRO Trek, JControl and Drifter units for tank reading display
• Suitable for use in caravans, boats, motor homes and camper trailers
• Suitable for plastic and metal water tanks
• Available in 2.5M, 5M and 7.5M cable lengths

BMPRO Dipper Water Tank Level Indicator with 5m Cable, 2 Year Warranty. The Dipper is a digital water tank level indicator designed to be used in both plastic and metal water tanks. It gives an accurate reading of the water levels in fresh and grey water tanks on recreational vehicles, camper trailers and boats.

This water tank sensor is easy to install into the side of your water tanks. Retrofitting is a DIY job thanks to the 5 pin connector located close to the ring terminal.

The Dipper has been designed for use with the suite of BMPRO battery management systems (BatteryPlus35/Trek, Drifter, J35, JControl), and is also compatible with a range of aftermarket tank level indicators.

This model has a 5 m cable.

Features:

• Easy Installation – no need to rewire if retrofitting
• Fits existing water tanks
• Compatible with BMPRO Trek, JControl and Drifter units for tank reading display
• Suitable for use in caravans, boats, motor homes and camper trailers
• Suitable for plastic and metal water tanks
• Available in 2.5M, 5M and 7.5M cable lengths

BMPRO Dipper Water Tank Level Indicator with 7m Cable, 2 Year Warranty. The Dipper is a digital water tank level indicator designed to be used in both plastic and metal water tanks. It gives an accurate reading of the water levels in fresh and grey water tanks on recreational vehicles, camper trailers and boats.

This water tank sensor is easy to install into the side of your water tanks. Retrofitting is a DIY job thanks to the 5 pin connector located close to the ring terminal.

Features:

• Easy Installation – no need to rewire if retrofitting
• Fits existing water tanks
• Compatible with BMPRO Trek, JControl and Drifter units for tank reading display
• Suitable for use in caravans, boats, motor homes and camper trailers
• Suitable for plastic and metal water tanks
• Available in 2.5M, 5M and 7.5M cable lengths

BMPRO OdysseyLink104 Communication Centre for Odyssey & SmartConnect Systems, 2 Year Warranty. OdysseyLink104 is a communication centre for smart RV systems, such as Odyssey and SmartConnect. It communicates wirelessly and via CAN bus, connecting your vehicle’s power management system to the monitor, display or an app.

OdysseyLink104 comes supplied as a standard on 2022 RV models of major Australian manufacturers, and allows campers to use Odyssey app on their own smartphone.

Add OdysseyLink104 to RVView2 or Trek3 to build up a complete Odyssey system.

OdysseyLink104 is also SmartConnect ready, allowing to connect multiple Bluetooth sensors, such as SmartSense, SmartTemp, or SmartPressure, to wirelessly monitor variety of caravan’s parameters.

The owners of caravans with Odyssey onboard can replace their existing OdysseyLink to OdysseyLink104 for SmartConnect compatibility, and enjoy the new level of integration in their RV.