Carefree Altitude 14ft (4.27m) Silverfade White Rollout Awning with LED Lightbar, FY1686D00RA

Carefree Altitude WHITE Awning Hardware Set, 1 Year Warranty. This awning hardware kit is attached to the awning itself, acting as awning arms that extend and retract with the motor. Their impressive strength and durability allow them to be the primary source of awning support.

Features:

• Supporting arms of the awning are motorised and feature inbuilt shocks for reliability by soaking up the odd bump or two.
• Only suitable for pop-tops and caravans due to their compact height.
• Pitch angle is adjustable with 6 different levels
• Strong enough to support the awning without legs, though extra ground support is recommended for longer stays.

Carefree Altitude BLACK Awning Hardware Set, 1 Year Warranty. This awning hardware kit is attached to the awning itself, acting as awning arms that extend and retract with the motor. Their impressive strength and durability allow them to be the primary source of awning support.

Features:

• Supporting arms of the awning are motorised and feature inbuilt shocks for reliability by soaking up the odd bump or two.
• Only suitable for pop-tops and caravans due to their compact height.
• Pitch angle is adjustable with 6 different levels
• Strong enough to support the awning without legs, though extra ground support is recommended for longer stays.

Carefree Awning Hd Support Pole Kit, 1 Year Warranty. The new Carefree Altitude HD Support Pole Kit is a purposed-designed support pole kit to suit Carefree’s Altitude Awnings, and other rollout awnings without support legs. Staying in one place for an extended time with an Altitude awning will require them to have some kind of upright support.

The HD Support Pole Kit comes with two connecting heads so it can be used to support awnings with roll bars as well as box awnings. They are designed to fit both Carefree and other branded awnings.

Features:

• Cradle head to support awnings with roll bars

• Stabiliz’r Grip head to allow securing to a box awning

• Poles feature crank knobs to secure the pole to the adjusted height

• Comes with stakes and straps to secure the poles to the ground and awning.

• Designed for quick set up, under 5 minutes!

• Poles extend from 1422mm to 2743mm (max)

Important!

When using this kit with Altitude awnings, or any powered awning, ensure that the awning’s power is switched OFF prior to installation! This prevents any sensors the awning has from activating and causing it to retract. If you need to adjust the awning pitch after set up, loosen the pole’s straps and lower before adjusting.

CAREFREE ALTITUDE BT-12 CARAVAN ELECTRONICS (SWITCH, BT-12 MODULE & FASTNERS), 1 Year Warranty. This optional electronics kit enables Bluetooth™ operation of the Altitude through a compatible smart device. It also includes a Combination switch that allows a Master ON/OFF as well as a one touch EXTEND or RETRACT button. This kit allows you to:

• Open & Close the awning

• Turn the LED light bar On

• Adjust the brightness of your LED light bar

• Position the angle of the LED by bringing in or taking out the Awning

• Adjust the optional motion switches sensitivity to complete override if this is installed

Note: BT-12 Motion Sensor is only compatible with the BT-12 Switch

Carefree Altitude BT-12 Motion Switch, 1 Year Warranty. A motion switch to suit the Carefree Altitude. This switch on the awning is used to detect unwanted motion, like extra wind. It then instructs the awning to automatically retract if it detects.

*This model (R060808-001) replaces the old model (R060784-001):

Carefree Altitude LED Switch With Fuse, 1 Year Warranty.

Carefree Altitude Extend & Retract Switch With Dynamic Brake, 1 Year Warranty.

Peggy Peg Standard Plastic Screw-in-Peg, 200mm, Pack of 12, 1 Year Warranty. Peggy Peg Screw-in pegs proven a million times, the smartest way to tie down!

• Five times lighter than an equivalent metal peg. Ten times better grip!
• Generous thread for a secure grip. Ideal for soft, sandy soils!
• Can also be used in hard, rocky grounds by using the height-adjustable hooks or Lock Nut!
• Robust, fibre-glass, UV-resistant polyamide or Aluminium!
• Quick and easy to use!
• When it's time to go, just screw it out-it's that easy!

All our Peggy Peg plastic screw-in pegs are produced from Fibre-glass reinforced UV-resistant polyamide. At first sight, the colour may seem a bit odd, but our Peggy Pegs can be seen more quickly. Peggy N is the height-adjustable all-purpose Peggy Peg for awnings, cords and tents etc. Product testers travelling all around Europe have approved that Peggy N can be used in 90% of all cases by its height adjustment. Pre-drilling might be useful in hard or frozen grounds (take a 10 mm drill). Attention: Only continue to drill with all our Peggy Pegs as long as the screw is driving in.

Benefits:

• Application: From normal or hard grounds to soft grounds.
• Screws into ca. 90% of all grounds (tested).
• All-rounder screw-in peg for many types of applications.
• 1/5 of the weight compared to a common peg.

Product Includes:

• 12 x Screw-in pegs - color: orange N 20cm
• 12 x Hooks N - color: blue

Peggy Peg Fix & Go Anchor Plate, 1 Year Warranty. Even though the weather seems to be good, an awning should always be fixed tightly to the ground. The awarded Fix&Go Anchor Plate 2.0 will be a perfect solution.
While setting up your awning you simply put each leg in one of our Fix&Go Anchor Plate 2.0 and lock them in position. Secure the plates with a few Peggy screw-in pegs - ready.
The advantage of this Anchor Plate is that you can quickly retract the awning legs again by only opening the sliders. If you need some shade again you simply extend the awning and secure the awning legs back into the still secured Fix&Go Anchor Plates. Plate and locks were designed to suit almost every kind of awning and tent poles. (Fiamma, Thule Omnistor, regular tent poles up to 25mm) With the two orange sliders, you can quickly secure or unblock in just seconds. You can use every screw-in peg of the whole Peggy Peg range to fix the plate.

Unlike normal tent pegs, Peggy Pegs promote maximum holding in vertical movement due to the thread of the pegs as well as in horizontal directions. Used together with the Fix&Go Anchor Plate 2.0, this allows for excellent security of your awning as well as a piece of mind. So when the afternoon breeze picks up, you can be happy that your awning legs will remain firmly on the ground!

Peg&Stop screw-in pegs work on almost every ground in combination with their locknuts. The flat Fix&Go Plate offers a bigger area of support! In combination with two, Peggy L screw-in pegs awning legs or tent poles won't sink on sandy ground/beaches.

• Awning legs or tent poles are securely fixed and won't sink into the ground or lift off.
• Retraction of your awning is possible at any time.
• Simple secure or unblock via the orange Fix&Go sliders.
• Excellent security of your awning as well as a piece of mind!
• Compatible with every Peggy Peg

Includes:

• 1 x Fix&Go Plate
• 1 x Storm hook

Peggy Peg Tie Strap, 1 Year Warranty. The TieStrap is a wise extension for every awning owner. The bright coloured Strap is adjustable between 1,5-3 metres without having any loose cord ends. Our TieStrap is perfect for storm anchoring purposes for almost every awning in the market. It’s also possible to use it for tents or sun sails. Peggy TieStrap is also necessary when you want to attach side elements to the awning while using our Fix&Go AntiFlap.
The Peggy TieStrap slides into the awning rails with the enclosed T‐Connector and is then anchored to the ground with a Peggy Peg or the u-shaped steel hook of the Anchor Plate 1.0 or 2.0. The incorporated relieving springs absorb a huge part of the wind power. Such a spring system is used for the first time in the European camping market and allows the strap to be flexible in the wind even if there is too much pressure. The TieStrap should be stretched away from the vehicle. This brings the advantage compared to a normal Storm Strap as it distributes the wind power to the whole length of the robust front aluminium bar. Clever solution: All our Peggy Peg sizes fit through the loop of the spring. This results in continuous tensioning - even if the strap is not properly tensioned, no part can unhook.

Practical advice: When the Peggy Peg is securely screwed into the ground, simply attach the spring via the hook the peg - ready! 
Suitable for Peggy N, L, LA, HC and anchoring plates and Anchor Plates (optionally available). Recommended extensions: Fix&Go Storm Anchor Set and Fix&Go Anchor Plates

Benefits:

• Adjustable strap (1,5 - 3 Meter).
• Incorporated spring system allows for tension relief.
• No loading of the awning leg joints.
• Suitable for Screw-in pegs N, L, LA, HC.
• Suitable for Kings, Dune, XTM, A.R.B., Supa peg, Fiamma, Carefree, Thule, Aussie Traveller, Dometic, 23Zero, Ironman 4x4, Nomad by CAOS etc. 
• Product contains:
• 1 x TieStrap with incorporated relieving springs 
• (we advise two for a standard sized awning)
• 1 x T-Connector 6 mm in its diameter