Ford Ranger Wildtrak/Raptor (2012-Current) Roll Top Slimline II "Digger" Pack by Frontrunner
SKU: KRRT016T_BUNDLE_3 Learn More»Product Description
Ford Ranger Wildtrak/Raptor (2012-Current) Roll Top Slimline II "Digger" Pack by Frontrunner, Limited Lifetime Warranty
Pack Includes:
- Ford Ranger Wildtrak (2012-Current) Roll Top Slimline II Load Bed Rack Kit - by Front Runner, KRRT016T
- Ratcheting Spade/Shovel & Paddle Mount - by Front Runner, RRAC024
- Recovery Device & Gear Holding Side Brackets - by Front Runner, RRAC103
Ford Ranger Wildtrak (2014-Current) Roll Top Slimline II Load Bed Rack Kit - by Front Runner.
This kit creates a full-size rack that sits above your Ford Ranger Wildtrak's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1156mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Installation Instructions for LASS028
Installation Instructions for RRSTJ06
Ratcheting Spade/Shovel & Paddle Mount - by Front Runner.
- Mount a spade/shovel or similar gear up and out of the way on the side of a Front Runner Roof Rack.
- These brackets install along the Slimline II Roof Rack Tray side rails in minutes. No drilling required.
- Can accommodate most shovel sizes and is adjustable to fit gear 1/2" (12mm) to 2" (50mm) in diameter.
- 2x Spade/Shovel Bracket
- 2x Ratchet buckle
- 2x Ladder Strap
- 1x Nut and bolt kit
Recovery Device & Gear Holding Side Brackets - by Front Runner.
- These off-road tough brackets securely mount MAXTRAX, TRED Pro and other similar hole spacing recovery devices to the side profile of a Front Runner Slimline II Rack.
- Also use for mounting the Pro Ski, Snowboard & Fishing Rod Carrier .
- Adjustable in height and angle to compliment various vehicle profiles.
- Includes 2 types of bolts for holding either 1 or 2 pairs of MAXTRAX/TRED Pro.
- Built to mount to the side profiles of a Slimline II roof rack but are also compatible with the original Slimline rack.
- Finished with the same durable, weather resistant black powder coating as the Slimline II Rack.
- The included bolts can be substituted with the MAXTRAX Mounting Pin Set (sold separately) to lock MAXTRAX in place.
NOTE: Pro Ski, Snowboard & Fishing Rod Carrier not included.
Specifications
SKU KRRT016T_BUNDLE_3
Brand Front Runner
Warranty Period: Limited Lifetime
Product Category Roof Racks and Platforms
Product Material Black epoxy powder - coated T6 aluminium | High strength steel
Weight (kg) 32.5100
Included 3x LASS028 - Pick-Up Roll Top Leg Mount | 3x RRAC962 - Track Mount Stud Plate |1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)
Videos
Slimline II Roof Rack - by Front Runner
Front Runner Roof Rack Install
THE ROOF RACK TO END ALL ROOF RACKS?
CRAZY JEEP WRANGLER ROOF RACK STUNT
STRONGEST ROOF RACK
RACK MOUNT SHOVEL HOLDER - by Front Runner
Product Q&A
Customer Reviews
Warranty
For details relating to this product's warranty CLICK HERE
Delivery
For details relating to our delivery process CLICK HERE